Tools Room V Block with Clamp
REQUEST FOR QUOTE BELOW
- Series AA-175
- The sides are ground parallel and the ‘V’ groove is ground central and parallel to the sides and the base.
- The block is 48mm square, and the base length is 90mm. An added feature is the tapped holes used for mounting the ‘V’ Block on face plates or angle plates.
- The block also has one M10 tapped hole in the base and one M8 on each side so that it can be attached to an angle plate. The groove at the stepped end is at a right angle to the base and is handy for holding threaded studs, round pins.
|Sr.No||Cat No.||Size in mm
L x W x H
|1||AA-1751||With one V Block & One Clamp 48 square x 90L||30mm|